IEC60529 Dust Resistance Test Chamber with Temperature and Humidity Control System

IEC60529 Dust Resistance Test Chamber with Temperature and Humidity Control System

Brief Introduction:

iqualitrol dust proof testing chamber is according to IEC60529, IEC 60598, GB2423.37-89 (Test L:dust test methods), GB 4208-93 protective casing grade (IP code), GB/T 4942.2-93(protective casing grade of low-voltage apparatus), GB 7000.1-1996, GB 7001-1986(protective casing grade of lamps),DIN40050 and IP5K0. The XB-OTS-IP65X is applied in LED or other luminaries for IP5X and IP6X test.

Dust resistance test chamber used to do dust proof and dust resistance experiment for various automobile parts.

The main test parts include lights, instrumentation, safety belt, seat regulator, electric dust cover, steering gear shaft and locks, to test its dust resistance and movement safety.

Flow dust testing in accordance with IEC60529 and MIL/STD810D.

Internal dimension of chamber is available custom made.

Features:

1, Uniformly synchronization hammer vibration dust emission device;

2, Auto adjust dust concentration 100mg/m3-60000mg/ m3;

3, Interior chamber temperature and humidity control system;

4, Electrostatic eliminating device can avoid the dust on the chamber wall;

5, Automatic dust dehumidification system, to reduce the water content of dust and make sure dust in stable quality;
6, Available to supply EIA, JIS industrial dust, Arizona ash, butenandt cement, talc, Kanto sand dozens of respirable dust and not respirable dust;

7, Disposable dust belt, ensuring the safety of operator;
8, Automatic dust recovery device, reduce into chamber cleaning.

Technical Specifications:

temperature controlled chamber

temperature cycle chamber

IEC60529 Dust Resistance Test Chamber with Temperature and Humidity Control System Images